2026-11-17 · StackFill
Die-Cut Template PDFs for Print Shops
Build a die cut template PDF that cutters can follow: dieline spot color, overprint, bleed, safe zone, preflight, and how to lock the dieline.

A die cut job can fail in two places. On press, it fails when the artwork stops short of the cut and leaves a white sliver. At the cutter, it fails when the dieline has the wrong color or the wrong name, or when it's mixed into the art. A clean die cut template PDF prevents both problems.
This reference covers what the file needs, how to build the dieline so a cutter or plotter can follow it, and how to keep that dieline locked while customers personalize the artwork.
What a Die Cut Template PDF Actually Has to Contain
The cutter and the press need different things from the same file. The cutter reads paths and ignores how the art looks. The press prints the art and should never print the dieline. Your job is to keep those two apart.
A working die cut template PDF contains:
- Artwork. CMYK and any spot inks, extended past the cut into bleed.
- A dieline. One vector path on a named spot color, set to overprint, on its own layer.
- Secondary lines. Crease, fold, perf and kiss cut lines, each on its own spot color.
- Correct page boxes. The TrimBox matches the bounding rectangle of the die, and the BleedBox includes the bleed. For odd shapes, the dieline sets the real cut. The boxes tell imposition software where the piece sits.
- A slug note (optional). Job name, die number and a line legend, placed outside the bleed so it never prints on the piece.
If any of these are missing, someone in prepress rebuilds them by hand. That cost shows up as turnaround time lost to file problems.
Put the Dieline on Its Own Spot Color and Layer
Use the exact name your finishing equipment expects. Many contour cutters and RIPs look for a specific spot color name, such as "CutContour" in Roland workflows. Other shops use "Dieline" or "Thru-cut." Spelling and capitalization count. "Cutcontour" may be ignored. Ask your finishing team for the exact name and put it in your template standards.
Make it a true spot color at 100% tint. Pick an alternate color that stands out on a proof, like 100% magenta. Never build the dieline from process values. If you do, the RIP treats it as ink and prints it on your job.
Set the stroke to overprint. If the dieline knocks out, the artwork underneath gets a hole cut into its separations. If the line is ever left on during output, you get a thin white line through the art. Overprint avoids that. Our overprint vs knockout field guide explains why this matters across the whole file.
Keep the stroke thin with no fill. A 0.25 pt stroke is common. The cutter follows the center of the path, not the edge of the stroke, so a heavy line adds nothing but confusion on the proof.
Give it its own top layer. Name the layer "Dieline" so prepress can switch it off for print and on for cutting. See PDF layers for print for how to structure layers that hold up downstream.
Use one clean, closed path per shape. Stacked duplicate paths cause double cuts. Stray anchor points cause nicks. Expanded strokes turn one line into two outlines, and the cutter will try to cut both.
Set Bleed, Safe Zone, and Cut Tolerance Around the Dieline
Bleed follows the shape. Extend the artwork at least 0.125 in (3 mm) past the dieline, all the way around. On a circle sticker or a rounded tag, the bleed is an offset of the curve, not just the page rectangle. Many die cutting shops ask for more than the minimum. Set it to your own spec. Our bleed and trim setup reference covers the page box side of this.
The safe zone sits inside the cut. Offset the dieline inward by at least 0.125 in. Keep text, logos, QR codes and anything else critical inside that line.
Plan for drift. Steel rule dies and digital contour cutters both shift a little from sheet to sheet. Ask your finishing team how much drift to expect on each machine. Then size your bleed and safe zone to cover it, with room to spare.
Avoid thin borders near the cut. A narrow frame hugging the dieline shows every fraction of drift as uneven margins. Either make borders thick enough to hide the shift or keep them inside the safe zone.
Leave room for registration marks. Contour cutters usually read printed marks placed by the cutter software. Keep the areas those marks need clear of artwork.
Separate Cut, Crease, Fold, and Perf Lines
Each finishing action gets its own spot color, its own layer and its own overprint setting. Never mix them on one path or one color.
| Line type | Example spot name | What the finisher does | |---|---|---| | Through cut | CutContour or Dieline | Cuts all the way through the stock | | Kiss cut | KissCut | Cuts the face stock, leaves the liner | | Crease or score | Crease | Presses a fold channel, no cut | | Perforation | Perf | Cuts a tear line | | Fold (reference) | Fold | Information only, no tool |
Don't use dash patterns to mean "perf." Cutters read the path and the spot color name. They don't read stroke styling. A dashed stroke on the cut color may come out as a solid cut, or as dozens of tiny separate cuts. Use a solid path on the "Perf" spot color and let the tool set the perf pattern.
Match names to the actual equipment. If your cutter maps "Crease" to a creasing wheel, then "Score" won't trigger it. Write the names down once and use them on every template. Put a short legend in the slug so the press operator knows what each line does.
Preflight the Template Before It Reaches the Cutter
Run these checks every time the template changes:
- Spot names are exact. Look for duplicates like "Dieline" and "Dieline 2." Those happen when files get merged.
- Technical lines are still spot colors. Some export presets convert spot colors to process. PDF/X-1a allows spot colors, but a preset can still flatten them into CMYK. Read our notes on spot color preservation before you export.
- Overprint is on for every technical line. Check it with an overprint or separations preview, not the normal screen view.
- Paths are closed, single and not stacked.
- Artwork reaches the bleed offset everywhere, especially on curves and inside corners.
- Nothing critical sits outside the safe zone.
- TrimBox and BleedBox are set, and fonts are embedded.
Run the file through a PDF preflight check to catch missing bleed, color space problems and font issues before the job reaches the cutter.
Lock the Dieline and Let Customers Edit Only the Artwork
Once the template is right, the risk moves to customer edits. They change a name, a date, a logo. In a typical web-to-print setup, someone first rebuilds the design inside the platform's editor, dieline included. That rebuild is where spot names get retyped, overprint gets dropped and curves get redrawn slightly off.
You can skip the rebuild and use the finished PDF you already have. StackFill reads the PDF into a structured scene graph. You mark which text and image elements customers may edit and lock everything else: the dieline, crease and perf lines, and the rest of the art. Locked elements are carried over from the source file, not redrawn, so the spot color names and overprint settings stay as you set them. The customer works against a live proof rendered from the same file they download as a press-ready CMYK PDF. Final color still depends on your press, stock, RIP and proofing. The how it works page walks through the steps.
To be clear, StackFill doesn't design dielines or create artwork. It makes the template you built fillable. Your prepress standards stay exactly where they are.
A few setup tips for fillable die cut templates:
- Keep editable text boxes inside the safe zone. Then a long name can't creep toward the cut.
- Set character limits on fields where the space is tight.
- Size image frames to the bleed offset if customer photos need to run off the edge.
- Leave the slug and die number locked, so every download carries its job info.
If your shop still hand-edits customer files on die cut work, the print shops page shows how other shops use their existing templates this way.
Build the dieline right once and lock it. Use the file you already have.