2026-11-17 · StackFill
Print-Ready Business Cards: Bleed, CMYK, Fonts
Exact specs for a print ready business card: bleed, safe zone, CMYK setup, TAC limits, font embedding, and a preflight checklist to avoid reprints.

A business card is a small file that causes a disproportionate number of reprints. The trim size is tight, the type is small, and customers often submit files built for screens. This reference covers the numbers your shop needs and the mistakes that turn a 500-card run into a redo.
Standard Business Card Dimensions and Bleed Requirements
The standard US print ready business card trims to 3.5 × 2 inches. All content must sit inside a safe zone at least 0.125 inches (⅛ in) from the trim edge. Anything meant to print edge-to-edge must extend to a full 0.125-inch bleed on all four sides, making the total document size 3.75 × 2.25 inches.
Without bleed, a white halo appears after cutting. With bleed but no safe zone, text and logos get clipped. Crop marks belong outside the bleed area. See PDF Crop Marks: Print Shop Prepress Reference and PDF Bleed and Trim Setup: Print Shop Reference for full documentation.
CMYK Setup: Profiles, Ink Limits, and What to Avoid
Business cards are printed CMYK or with spot colors. RGB files are not press-ready and will either be rejected or converted at the RIP, where colors often shift noticeably.
- Color mode: CMYK throughout. No RGB or Lab objects in the file.
- Color profile: Embed an output-intent profile. SWOP v2 or GRACoL 2006 are standard for offset; confirm against your press and substrate.
- Total ink coverage (TAC): At or below 300% for coated stock, 280% for uncoated. See Ink Coverage Limit Print: TAC Prepress Reference for the math.
- Black text: Use 100K only for text under about 24 pt. Rich black on small type causes registration blur. See Rich Black CMYK: When to Use It and When to Avoid It.
- Spot colors: If the job calls for a Pantone color, confirm whether your press runs it as a true spot or converts to CMYK. See Pantone to CMYK Conversion: What Happens to Color.
Save as PDF/X-1a or PDF/X-4. Do not accept "print quality" exports from web apps without a preflight check.
Font Embedding: Why Missing Fonts Kill Jobs
A font not embedded in the PDF will be substituted at the RIP. The substitution is rarely correct and often reflows text so names or phone numbers no longer fit the card.
Every font must be fully embedded before the file leaves the designer's machine. Subsetted embedding is acceptable for PDF/X-1a. To verify, open the PDF in Acrobat, go to File > Properties > Fonts, and confirm every font shows "Embedded Subset" or "Embedded." Anything else is a problem. See PDF Font Embedding for Print: Fix It Before Press for the fix.
Resolution and Image Specs
- Raster images: 300 DPI minimum at final print size.
- Vector art: Use vector for logos and icons wherever possible.
- Image color mode: All placed images must be CMYK, not RGB.
- PDF transparency: Flatten before submitting for PDF/X-1a. See PDF Transparency in Print: RIP Risks and Fixes for what can go wrong.
Preflight Before You Submit
Run a preflight check on every print ready business card file, every time:
- Document size is 3.75 × 2.25 inches with bleed
- All fonts embedded
- All images 300 DPI or higher at final size
- Color mode is CMYK throughout
- TAC within spec for the substrate
- No missing links or low-resolution placed images
- PDF/X-1a or PDF/X-4 compliance confirmed
For broader lists, see PDF Preflight Checklist for Gang Run Files and Print Ready File Preflight: 7 Errors That Cause Reprints.
When Customers Fill the File Themselves
Many shops offer customer-personalized business cards where the customer enters their name, title, and contact info into a locked template. If the fill tool preserves CMYK output, the resulting file should pass the same preflight checks above. If it converts to RGB at output, the file is not press-ready regardless of how clean the source PDF was.
StackFill ingests your finished press-ready PDF, marks which fields customers can edit, and outputs a byte-identical CMYK PDF after personalization. No rebuild of the design is required. If your shop is hand-editing customer files today, see Reduce Print File Editing Time for Customers and Editable Business Card Template That Prints Right for how shops have cut that loop.
Get the spec right on the first print ready business card file. Every reprint starts with a file that missed one of these numbers.